75mm Hole Size Welded Ming Wire Mesh for Coal Mine Underground Supporting

75mm Hole Size Welded Ming Wire Mesh for Coal Mine Underground Supporting

Welded wire mesh

Welded wire mesh is constructed with two orthogonal wires that are joined with each other at their intersections employing a resistance welding process to kind a grid. The line wires of the grid are guided via the welder utilizing a sample board. The equipment drops cross wires into area and fuses them collectively to develop the two exclusive planes that kind welded wire mesh.

Line wires (also referred to as long wires) are laid out on a pattern board to set the panel width spacing. Cross wires are fed into a hopper, and are programmed to be dropped 1 at a time on to the line wires. Then, the cross wires are resistance welded into place placing the panel length spacing. The panel advances soon after the weld and the procedure starts off above once again.

Welded Wire Spacing
Welded wire mesh spacing can be expressed by measuring from the heart of two wires (Heart to Centre) or by measuring the opening between two wires (Clear Opening). We can manufacture normal and custom made welded wire mesh with a sq. mesh spacing variety from one” to as massive as might be required.  Rectangular mesh spacing ranges from one/2″ x up to as extended as may possibly be required.

Edge Situations
 Welded Wire Mesh has two normal edge circumstances: trimmed and untrimmed.

Element specification:
Content: reduced carbon steel wire, galvanized wire ,stainless metal wire
Area dealing : black welded wire mesh,
electro galvanized before welded wire mesh,
Electro galvanized after welded wire mesh
scorching-dipped galvanized before welded wire mesh
Hot-dipped galvanized after welding wire mesh
PVC-coated welded wire mesh
Electricity coated welded wire mesh
Wire diameter: .45mm to twelve.0mm
Hole dimension: 1/3″ to 150 mm hole
Hole form: square gap, rectangular hole
Width: .3M to 2.0M
Packing : in roll or in panel

please be aware, we can weave speical wire diameter welded wire mesh these kinds of as one/four”X1.1mm, one/two”X1.4mm and so on on your requirement 

Welded wire mesh Specification:

Open in inch Opening in (mm) Wire diameter
one/4″ x one/four”
six.4mm x 6.4mm
3/eight” x three/eight”
10.6mm x ten.6mm
one/two” x one/two”
12.7mm x 12.7mm
5/eight” x five/eight”
16mm x 16mm
three/4″ x 3/4″
19.1mm x 19.1mm
1″ x 1/two”
twenty five.4mm x 12.7mm
twenty five.4mmX25.4mm
one-1/2″ x 1-one/2″
38mm x 38mm
1″ x two”
twenty five.4mm x 50.8mm
two” x 2″
fifty.8mm x fifty.8mm
2″ x 3″
50mm x 75mm
three” x three”
75mm x 75mm
two” x four”
50mm x 100mm
two.11mm,two.5mm, 3.0mm, 4.0mm
four” x 4″
100mm x 100mm
two.0mm,2.5mm, 3.0mm, 4.0mm
CZPT Observe:
1,CZPT roll duration:20- 30mwidth: .5m to 1.8m
2,Special measurements CZPT at ask for
three,Packing: in watertight paper in rolls. CZPT packing CZPT at request.


75mm Hole Size Welded Ming Wire Mesh for Coal Mine Underground Supporting


Detachable Chain

As one of the detachable chain with sawtooth plates manufacturers, suppliers, and exporters of mechanical products, We offer detachable chain and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of detachable chain.

Recent Posts